Overview
- Original new XLSEMI chip
- SMD electrolytic capacitors
- Up to 400Khz operating frequency, and LC filter circuit, the output ripple is very low
- Input and output of three MLCC multilayer ceramic capacitors, anti-interference and improved stability.
- Built-in MOSFET, can reach 94% efficiency.
- Increased activated port, you can control whether the booster circuit is working.
Characteristics
- Module Properties: non-isolated push module
- Size (without potentiometer): 49 * 23.4 * 11.4mm (L * W * H)
- Input voltage: DC 5-32V
- Output voltage: DC 5-50V continuously adjustable
- Input current: 4A (max)
- Output current: 2.5A (max)
- Output power: 15W (natural cooling)
- Maximum output power = input voltage * 4A * conversion efficiency
- Conversion Efficiency: Commonly measured voltage and current efficiency (the following is for reference)
- Operating temperature: industrial grade (-40 to + 85 degrees Celsius)
- Temperature rise at full load: 45 degrees Celsius
- Operating frequency: 400khz
- No-load current: typical 15mA (5 V turn 12 V)
- Load regulation: ± 0.5%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Enable Control Port: Yes, high level 1.4V-VIN (ON), low level 0-0.8V (OFF), the high level default
- Short circuit protection: none (please install fuse or protection circuit input)
- Input reverse polarity protection: none, please with our reverse protection diode board or in input series.
- Installation: you can screw the fixing (3mm fixing holes), 2 fixing holes
- Connection: solder, add pin can be soldered directly to PCB
- Note: this module without PCBA shell.
برای سفارش و یا برای کسب اطلاعات بیشتر و سفارش با ما تماس بگیرید.
هیچ دیدگاهی برای این محصول نوشته نشده است.