Size: 6.8 * 2.3 * 0.1cm
0V change allowed: yes
Double output current: 5V 1A / 2.1A
Input voltage B + to B-: 3.0 – 4.2V
Charging cable: Micro USB input and dual USB output
Button function: press and hold the button after standby, the LED digital display shows the power
[LED INDICATOR Display]
The digital LED display shows the current battery charge while charging.
When discharging, the digital LED display shows the current power, and the display is saved in about 30 seconds (double click the button to resume display).
The system will provide an accurate indication of the battery after a full charge and discharge.
[Prevent Overload Protection]
Detection voltage: 4.20 ± 0.05V
Release voltage: 4.100 ± 0.05V
Detection delay time: <200ms
[Prevent Over-discharge Protection]
Detection voltage: 3.0 ± 0.10V
Release voltage: 3.10 ± 0.10V
Detection delay time: <100ms
[Short circuit protection]
Short detection delay time: <50 μs
Release conditions: cut off load
[Normal current consumption]
Normal current consumption of PCM: Max 60μA
Stanby current consumption: 50 μa maximum
[Suggest working conditions]
Maximum continuous charge / discharge current: 1.5 / 2.4A
Suggest working temperature: -5 ~ 45 ℃
Note: The positive pole of the battery is connected to B + and the negative pole is connected to B-, do not reverse it. If it is reversed it will burn !!!!
This module is a portable emergency power supply with an input that matches the 5.0V adapter to charge the internal battery. Use built-in battery for portable device to provide USB2.0 5.0V / 3.0A power output for external devices.
1 * dual 2 USB charging card
برای سفارش و یا برای کسب اطلاعات بیشتر و سفارش با ما تماس بگیرید.