This is a core chip based on STM32F103C8T6 ARM core board, features as follows:
1- The board based on the most basic MCU circuit, 8Mhz crystal circuit, USB power supply circuit.
2- The core board is divided into two rows leads to all the I / O port.
3- With SWD simulation debug download interface, simple and convenient, debugging speed.
4- The use of the Mirco USB interface, you can do USB communication and power supply, USB interface, compatible with the ordinary mobile phone charger interface.
5- RTC crystal Epson brand, easy to start, more stable.
6- Keil can be used to compile, IAR compiler, can be downloaded through the JLink or USART1 procedures, the procedures are the owner and debugging procedures.
1- Package Type: LQFP
2- Number of pins: 48
3- Kernel: Cortex-M3
4- Operating frequency: 72MHz
5- Storage resources: 64K Byte Flash, 20KByte SRAM
6- Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports,
7- Analog-to-digital conversion: 2x ADC (12-bit / 16-channel)
8- Timers: 3 general timers and 1 advanced timer
9- Debug Download: Support JTAG / SWD debug interface to download, support for IAP.
-RT9193: 3.3V regulator chip, the maximum output of 300mA.
1- SWD interface: support for simulation, download and debug.
2- Mirco USB interface: power supply and USB communication, does not support the download.
3- USART1 interface: USART1 can be used to download the program, or use the USART1 for communication.
4- MCU pin interface: leads all I / O port pins, easy to connect with peripherals.
5- 5, 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatment.
Other Device Description
1- Power LED (PWR): Power indicator status, can determine whether the power supply is stable.
2- The user LED (PC13): to facilitate the I / O output test or indicate the program running.
3- Start jumping choose programming mode: (1, the user flash memory 2,SRAM 3, system memory).
4- Reset button: reset chip for the user program.
5- 8M Crystal: The frequency can be set to make the system clocked at 72MHz.
6- 32.768KHz Crystal: Available for built-in RTC, or for calibration.
برای کسب اطلاعات بیشتر با کارشناسان فروشگاه تماس بگیرید.